|
Bison 6.8" Low
Profile 4-Jaw Flange Mount Scroll chuck
7-640-0640
Model Number 9417
|
A
DIA. |
A1
DIA. |
B |
B1 |
E
DIA. |
F |
G |
H |
J |
K |
L |
M |
S |
N x J |
WT.(kg) |
|
9.3" |
6.8" |
2.04" |
.669" |
1.25" |
2.63" |
2.0" |
.334" |
.984" |
.669" |
.472" |
- |
.354" |
4 |
12.3 |
|
FEATURES |
- A milling fixture in the form of a
scroll lathe chuck with 2 piece jaws, integrated with the base.
- Depending on the adaption, it can be
used on milling machine tables, t-towers, drill tables, or
surface grinders.
- It has a mechanism drive from the
front of the fixture, you can use a standard wrench with a
spring or a ratchet knob with a cap.
- The fixture is sealed against chips,
the center by a cover, and the guides by extra teeth on the jaw.
- It has two locating keys and 4
recesses for fastening screws to be fixed to the
table/tower/pallet. It is possible to attach it by the
flange of the fixture with toe clamps to the machine table.
- The fixture is low profile, which is
and advantage for machine tools with a short z-axis travel,
because it does not limit the machine's movements like a chuck
with a base.
- when the profile is as low as
possible, standard 3200 soft jaw blanks can be used and shaped
accordingly.
|
|
